|
|
The Guide |
Photos |
Videos |
Columns |
Calendar
|
|
(photo 1) Inflate one of the brown 260 , leave 3" un inflated, and make two loops, followed by ( photo 2) a 4" . pinch . 5" . 5" . pinch . 4 " bubbles.
2
(photo 3) Lock the 4 bubbles together at the center (to make a good lock twist it with the loops from stage 1) make sure the 4" bubbles face the same way.
(photo 4) inflate the second brown 260 and leave 2" un inflated. Insert the balloon from the nozzle end to one of the loops from photo 1 and Tie the nozzle to the near pinch twist. measure a 12" bubble and make a pinch , Inflate the blush heart and connect it to the pinch you just did. (photo 5) Make another 12" bubble and repeat step 4.
5
(photo 5) Cut the balloon and tie the piece remain. Make sure the heart seats between the long bubbles.
(photo 6)Connect the remain bubble to the loops from stage 1 , make a small 1" bubble and connect it to the pinch that is locked with the blush heart . make sure to do it on the side where the bubbles from stage 3 Are 5" in size.
(photo 7) inflate the yellow 260 and make the legs with four 3.5" bubbles, Connect to the pinch as seen on( photo 7), then cut the remain and create two 3.5" bubbles for eyes.
7
(photo8) insert the eyes as seen and connect the tied ends to the pinch twists. Then inflate the black just a little , cut it so the is a soft 3.5" bubble.
(photo 9) connect the black 260 to the loops from stage 1 , split it to a 2.5" and a 1" bubble and lock it in place. Add art work to the eyes with a black and white marker.
9
